Mechanical, Thermal and Fire Retardant characteristics of NR/PP/ATH Thermoplastic Vulcanizates

Natinee Lopattananon, Alif Walong, Azizon Kaesaman, Tadamoto Sakai


Blends of natural rubber (NR) and polypropylene (PP) were melt-mixed with phenolic resin crosslinking agent to obtain thermoplastic vulcanizates (TPVs).  The blend composition of NR and PP was at 60/40 %wt.  Alumina trihydrate (ATH) was incorporated into the blends to improve the flame retardancy, and the effect of ATH incorporation at different levels (20-120 PHP, part per hundred polymers) on blend morphology, ATH dispersion, mechanical properties, thermal resistance and flame retardancy was investigated.  Analyses by transmission electron microscopy (TEM) and energy dispersive X-ray-scanning electron microscopy (EDX-SEM) revealed the dispersed phase-like morphology of 60/40 NR/PP TPVs.  The presence of ATH in the TPVs did not have much influence on morphology of 60/40 NR/PP blends.  Increasing ATH content decreased the dispersion level of ATH, which caused a decrease of tensile strength and elongation at break.  Furthermore, an addition of ATH into the NR/PP blends resulted in lower elastic recovery, but slight increase of hardness.  It was also found that the ATH suppressed the peak mass loss rate of NR and PP, resulting slower thermo-oxidative decomposition process of the blend materials.  Limiting oxygen index (LOI) and UL94-V rate were enhanced with more incorporated ATH content.  According to the results present in this study, the addition level of ATH for development of flame retardant NR/PP blend-based TPVs with acceptable elastomeric properties was recommended at 100 PHP.  


Natural rubber, Polypropylene, Thermoplastic Vulcanizates, Flame retadrdancy, Morphology



WK Fisher. 1973, Thermoplastic blend of partially cured monoolefin copolymer rubber and polyolefin plastics, U.S. Patent 3,758,643.

AY Coran and R Patel. Rubber-thermoplastic compositions. Part I. EPDM-polypropylene thermoplastic vulcanizates. Rubber Chem. Technol. 1980, DOI: 10.5254/1.3535023.

MV Duin and AV Machado. EPDM-based thermoplastic vulcanisates: Crosslinking chemistry and dynamic vulcanisation along the extruder axis. Polym Degrad Stab. 2008, DOI:10.1016/j.polymdegradstab.2005.04.050.

S Varghese, R Alex and B Kuriakose. Natural rubber-isotactic polypropylene thermoplastic blends. J Appl Polym Sci. 2004, DOI: 10.1002/app.2007.

C Nakason, P Wannavilai and A Kaesaman. Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Effect of compatibilizers and reactive blending. J. Appl. Polym. Sci. 2006, DOI: 10.1002/app.23260.

FR Passador, GJA Rojas and LA Pessan. Thermoplastic Elastomers Based on Natural Rubber/Polypropylene Blends: Effect of Blend Ratios and Dynamic Vulcanization on Rheological, Thermal, Mechanical, and Morphological Properties J. Macromol. Sci., Part B: Phys. 2013, DOI:10.1080/00222348.2012.756323.

M. Jarnthong, Z. Peng, N. Lopattananon and C. Nakason. Influence of incorporation sequence of silica nanoparticles on morphology, crystallization behavior, mechanical properties, and thermal resistance of melt blended thermoplastic natural rubber. Polym. Compos. 2012, DOI: 10.1002/pc.22331.

N Lopattananon, S Tanglakwaraskul, A Kaesaman, M Seadan, T Sakai. Effect of nanoclay addition on morphology and elastomeric properties of dynamically vulcanized natural rubber/polypropylene nanocomposites. Intern. Polym. Proc. 2014, DOI: 10.3139/217.2935.

AB Morgan and JW Gilman. An overview of flame retardancy of polymeric materials: application, technology, and future directions. Fire Mater. 2013, DOI: 10.1002/fam.2128.

Y Zhu, M Otsubo, C Honda and A Ohno. Suppression effect of ATH filler on the erosion of filled silicone rubber exposed to dry band arc discharge. Polym. Testing. 2005, DOI: 10.1016/j.polymertesting.2005.06.007.

M Sabet, A Hasssan and CT Ratnam. Flammability and thermal characterization of aluminium hydroxide filled with LDPE. Intern. Polym. Proc. 2013, DOI: 10.3139/217.2737.

P Hornby. Fire Retardant Fillers. In: Wilkie CA and Morgan AB (ed.). Fire Retardancy of Polymeric Materials. 2nd ed. CRC Press, NewYork, 2010, p. 163-85.

JM Cogen, TS Lin and PD Whaley. Material Design for Fire Safety in Wire and Cable Applications. In: Wilkie CA and Morgan AB (ed.). Fire Retardancy of Polymeric Materials, 2nd ed. CRC Press, NewYork, 2010, p. 783-808.

A Laachachi and JML Cuesta. Flame retardant polymer nanocomposites with alumina as filler. In: Mittal V (ed.). Thermally stable and flame retardant polymer nanocomposites, New York: Cambridge University Press, New York, 2011, p. 314-31.

C Canaud, LLY Visconte and RCR Nunes. Mechanical and flammability properties of ATH-filled EPDM compositions. Macromol. Mater. Eng. 2001, DOI: 10.1002/1439-2054(20010701)286:7<377::AID-MAME377>3.0.CO;2-S.

X Zhang, F Guo, J Chen, G Wang and H Liu. Investigation of interfacial modification for flame retardant ethylene vinyl acetate copolymer/alumina trihydrate nanocomposites. Polym. Degrad. Stab. 2005, DOI 10.1016/j.polymdegradstab.2004.08.013.

J. Liang and Y Zhang, A study of the flame-retardant properties of polypropylene/Al(OH)3/Mg(OH)2 composites. Polym. Int. 2010, DOI: 10.1002/pi.2733.

RH Farzad, A Hassan, MAM Piah and M Jawaid. Electrical and flammability properties of alumina trihydrate filled polypropylene/ethylene propylene diene monomer compositions as insulators in cable applications. Polym. Eng. Sci. 2013, DOI: 10.1002/pen.23473.

G Martin, C Barres, P Sonntag, N Garois and P Cassagnau. Morphology development in thermoplastic vulcanizates (TPV): Dispersion mechanisms of a pre-crosslinked EPDM phase. Euro. Polym. J. 2009, DOI: 10.1016/j.eurpolymj.2009.07.012.

S Abdou-Sabet, RC Puydak and CP Rader. Dymanically vulcanized thermoplastic elastomers. Rubber Chem. Technol. 1996, DOI: 10.5254/1.3538382.

SY Fu, XQ Feng, B Lauke and YM Mai. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Compos. Part B. 2008, DOI: 10.1016/j.compositesb.2008.01.002.

S Abdou-Sabet. Thermoplastic Vulcaizates. In: Paul DR, Bucknall CB (ed.) Polymer blends, Vol. 2: Performance. A Wiley-Interscience Publication, New York, 2000. p. 517-55.

M Maiti, A Bandyopadhyay and AK Bhowmick AK. Preparation and characterization of nanocomposites based on thermoplastic elastomers from rubber-plastic blends. J. Appl. Polym. Sci. 2006, DOI: 10.1002/app.22699.

JD Peterson, S Vyazovkin and CA Wight. Kinetics of the thermal and thermo-oxidative degradation of polystyrene, polyethylene and poly(propylene). Macromol. Chem. Phys. 2001, DOI: 10.1002/1521-3935(20010301)202:6<775::AID-MACP775>3.0.CO;2-G.

N Isitman and C Kaynak. Tailored flame retardancy via nanofiller dispersion state: Synergistic action between a conventional flame-retardant and nanoclay in high-impact polystyrene. Polym. Degrad. Stab. 2010, DOI: 10.1016/j.polymdegradstab.2010.05.012.

AR Horrocks, M Tunc and D Price. The burning behaviour of textiles and its assessment by oxygen-index methods. Text. Prog. 1989, DOI: 10.1080/00405168908689004.

YL Liu, YC Chiu and TY Chen. Phosphorous-containing polyacryloxydiphenyl-silanes with high flame retardance arising from a phosphorous-siicon synergistic effect. Polym. Int. 2003, DOI: 10.1002/pi.1179.


  • There are currently no refbacks.

Online ISSN: 2228-835X

Last updated: 13 February 2019